new The rise of eSIM. Watch our eSIM timeline here.

3-in-1 Removable Global IoT SIM Card

Combination Mini/Micro/Nano SIM

The 3-in-1 SIM card is trusted technology for low-cost and retrofit projects. It splits into 2FF, 3FF and 4FF sizes to fit standard SIM slots. And as it supports eSIM technology, it's not locked to a single operator.

  • Plastic SIM cards in all form factors:
    • Mini: 15 x 25mm
    • Micro: 12 x 15mm
    • Nano: 8.8 x 12.3mm
  • 2G, 3G, 4G/LTE and LTE-M
  • Operating temperature: -25°C to ~+85°C
  • Read/write cycles: min. 500,000
  • Supply voltage: 1.62 to 3.3V
  • Data retention: 10 years

Minimised battery consumption and lower overall costs are just some of the benefits of low-power SIMs. Includes Power Saving Mode (PSM), Extended Discontinuous Reception (eDRX), Wake Up Signals (WUS) and high-power classes.

Available on Digi-Key.

LTE (Long Term Evolution) technology allows users to stream, game, and surf with speeds of up to 42MBps! Ideal for consumer or high-traffic devices.

Available on Digi-Key.

Removable sim

Embedded IoT SIM

MFF2

Embedded SIMs provide all the benefits of industrial SIMs, but they are secured physically to devices. Highly resistant to physical demands and a fraction of the size of a removable SIM, they support eSIM technology as standard so are not locked to a single operator.

  • Size: 6 x 5 x 0.85mm
  • Endurance rating: 8 to 16 million cycles
  • Additional resistance against vibrations, moisture, corrosion, pressure and salt mist
  • Operating temperature: -40° to +105°C
  • Supply voltage 1.62V to 5.5V
  • 320KB memory
  • Data retention: 10 years @ 105°C, 15 years @ 85°C

Minimised battery consumption and lower overall costs are just some of the benefits of low-power SIMs. Includes Power Saving Mode (PSM), Extended Discontinuous Reception (eDRX), Wake Up Signals (WUS) and high-power classes.

Available on Digi-Key.

LTE (Long Term Evolution) technology allows users to stream, game, and surf with speeds of up to 42MBps! Ideal for consumer or high-traffic devices.

Available on Digi-Key.

embedded sim
 

eSIM for IoT

The Truphone eSIM comes as standard with our global IoT connectivity.

eSIM can securely provision and store multiple operator profiles—providing the ability to easily switch between networks. With Truphone’s data plans IoT devices can therefore be updated and connected remotely and at scale—the deployment and management of connectivity for thousands of devices, at your fingertips.

eSIM for IoT

A single SIM for global operations.

eSIM evolves the traditional SIM card from the ‘dumb chip’ locked to one network, to a smart, rewritable and network-agnostic module—which can be embedded into the device or written onto a removable card. eSIM is not a form factor but a new standard which provides enhanced capabilities to manufacturers and end-users.

Load operator profiles to multiple devices remotely, over the mobile network or using Wi-Fi.

Swap profiles without removing the SIM. Store multiple profiles on a single device.

Connect any device more efficiently. SIM form factors' flexibility often reduces the amount of device space taken up.

Allow roaming and moving devices to automatically navigate between network providers.

Enable IoT deployments to be updated by pushing profile changes to the devices from a unified control platform.

Set up devices more easily with pre-configured connectivity for an enhanced customer experience.

Download the Truphone eSIM Cookbook.

A few simple recipes to smooth the journey towards the next generation of connected devices using eSIM.

Out of the box connectivity

IoT without Wi-Fi, connected globally.

eSIM connects devices from the moment they are switched on. The fact that it can store multiple profiles on one chip allows manufacturers to ship products with a profile containing a small amount of connectivity built in. We call this the Bootstrap profile.

Centralised activation.

Bootstrap is essential to activate IoT devices remotely or where no interface is available. IoT administrators can use this connectivity to remotely provision an operational eSIM profile to the IoT device—either from Truphone or another operator of their choosing, without the need to manually interact with them.

Single-SKU manufacturing.

eSIM is especially suited to Truphone’s IoT data plans as our global network allows devices to be activated anywhere in the world. This provides for a more efficient supply chain—enabling device makers to confidently manufacture eSIM-enabled devices in a single production line, safe in the knowledge they will connect anywhere.

Single-SKU manufacturing.
sim module

Find the right module

Read our guide to the different types of modules that have been tested on our network and will support uninterrupted connectivity on our IoT data plans.

Learn more

FIND THE RIGHT eSIM

Read our guide to the different types of SIM card form factors, to find the right SIM for your IoT devices and project.

Learn more
GSMA

GSMA-accredited secure eSIM

The eSIM and its ecosystem are as secure as existing traditional SIM technology. All our products, solutions and processes are compliant with the latest GSMA standards to guarantee high reliability and full interoperability.